Vorsk VMP-1 GBB SMG with 2 Magazines & Suppressor - Black

The VORSK VMP-1 is a lightweight, full-polymer Gas-Blow-Back, Airsoft Sub-Machine-Gun that is at home on the skirmish field as it is in the CQB arena. VORSK is on a mission to deliver Gas-Blow-Back excellence to the Airsoft Field. Building upon their vast selection of Gas-Blow-Back sidearms, the VMP-1 is their first foray into the world of Sub-Machine-Guns. Announced at IWA 2023 and delivered to stores in the summer, the VMP has attracted a lot of attention due to its compact lightweight design, user-friendly features, and of course, excellent GBB performance.

Ergonomic, Compact & Lightweight

Constructed of a durable, lightweight polymer, the VMP-1 makes for an excellent primary in CQB environments. With the buttstock buried into your shoulder and your hands positioned towards the front of the replica, you'll enjoy a wide yet controlled "sweep" angle, perfect for transitioning around obstacles and room clearances. Those corner transitions are improved further by the 15-degree tilt mechanism installed inside the buttstock. This spring-centered tilt enables you to angle your body around a corner whilst holding the VMP-1 straight, reducing the chance of side-sweeping BBs caused by the hop curve not being parallel with the ground. The stock itself is foldable along the right-hand side of the VMP-1, simply lift the lock mechanism and rotate it into position "Akimbo, anyone". The pistol grip features molded stippling for a secure hold. Green fiber sights are neatly tucked within the 20mm Picatinny flattop accessory rail. Although difficult to get your eyeline behind when used with the buttstock, the bright fiber sights allow for speedy, instinctive parallax sighting for fast target acquisition. The foldable stock is built into an M4 Stock Tube receiver slot allowing you to refit your VMP-1 with an M4 stock of your choice

The Perfect Secondary

Built for the CQB Arena, but certainly capable of competing on the Airsoft Field. The VMP-1 when collapsed is only 345mm in length. With the ability to replace the rear shock with an M4 QD Sling Point and aftermarket holsters on the way, the VMP-1 is a worthy candidate as an explosive secondary for any Sniper/ DMR setups. But it needn't be a secondary when out in the wilderness of your nearest skirmish field. the VMP-1 is able to hit targets accurately with a predictable flight path at +30m and an exceptionally high ROF (Rate of Fire), and it'll certainly get you out of a pinch when called upon.

48-Round Full-Auto Gas-Blow-Back Fun

The VMP-1 is a select-fire Airsoft Sub-Machine-Gun. The fire controls are all in easy reach with the bolt release, magazine release, and fire selector all a finger or thumb away from your standard "on-trigger". position. Fire safety is controlled by a trigger safety requiring you to intentionally pull on the full trigger before allowing the VMP to fire similar to an airsoft Glock. Powered by gas, any premium airsoft gas such as the RWA Green Gas is suitable. You can expect to get at least two (potentially three) magazines worth of rounds per every gas refill. Additional magazines are available separately, remember to purchase your color-matched magazine (available soon) covers to complete the look. To adjust the hop unit, the VMP-1 is supplied with a tool key to adjust the hop wheel just inside the dust cover similar to the KWA MP9 / TP9 System 7 gas airsoft submachine guns.

Walk the Walk, Talk the Talk

Airsoft is all about immersing yourself in that day's objective, and it helps when your tool for the day "walks & talks" how you'd expect to. VMP-1 owners will enjoy all of the gunplay and transitions associated with GBB replicas. With the magazine load's "slide-click", the bolt's "slide-click-slam" and of course the sound of 48 rounds being unloaded downrange on full-auto, the VMP-1 will bring a smile to any airsofter to get their hands on it. Constructed of a durable polymer, the VMP-1 is fitted with metal accessories where required - the reinforced charging handle, 6.03mm Tight bore inner barrel, Flash Hider, Stock Hinge, and Dual-Location side rails.

Built for Accessories

An "undressed' VMP-1 will not be how they're seen in their natural environment - the Airsoft Arena. With a full-length 20mm Flat-Top accessory Rail, Under-Barrel Rail, Dual-Location 7-slot Side Rails, M4 compatible Stock Tube, and of course the optional "Can" suppressor, the VMP-1 is crying out for additional aftermarket accessories. Recommended aftermarket accessories would include Foregrips, Lasers / Torches, and perhaps Holosun Optics. Barrel Attachments are limited when the provided Flash Hider is fitted as this has been designed specifically for the "oversized" suppressor supplied with the "X" variant (also available separately). Should you wish to fit your own Flash Hiders, Suppressors, or Tracer Units, simply remove the Flash Hider via its grubscrews and replace it with any 14mm CCW airsoft barrel attachment.

Check out more Airsoft Guns

Magazine Compatibility:

• Vorsk VMP-1 Gas Airsoft Magazines
• KWA MP9 / TP9 System 7 Series Gas Airsoft Magazines

Includes:

• x1 Vorsk VMP-1 GBB SMG (Black)
• x2 48 Round Vorsk VMP-1 Gas Airsoft Magazine
• x1 Set of Spare O-Rings
• x1 Mock Suppressor
• x1 Manual
• x1 Vorsk VMP-1 PVC Patch

Bolt & Stock Maintenance Video for the Vorsk VMP-1: