$999.00
Price
Photos for reference only. Shipping to some countries require red tips for legal compliance.

VFC SR25 KAC MK11 MOD0 GBB Airsoft Rifle DX Version (Licensed by Knight's Armament)

VF2-LMK11M0-BK81
In Stock.
Out of Stock.
SKU
VF2-LMK11M0-BK81
The SR 25 rifle (Stoner Rifle, model 25) was developed by Reed Knight (owner of Knights Armament Co) and Eugene Stoner (designer of M16 and Stoner 63 rifles among other things) during early 1990s. In essence, the SR 25 was the AR-15 rifle scaled up to shoot 7,62x51 / .308 Win ammunition, with up to 60% of parts of new rifle being interchangeable with standard AR-15 components. This rifle sold well among civilian shooters who needed an accurate semi-automatic rifle in 7,62 / .308 caliber for hunting or target shooting. This rifle also found a favor among US Military - during early 1990s it was adopted by US Navy SEAL groups, as Mark 11 Model 0 sniper rifle system; use of Mk.11 Mod.0 rifle was later extended to US Marine Corps. Mark 11 Model 0 rifle system included the semi-automatic SR-25 rifle, a quick-detachable sound suppressor, also developed by Knights Armament Co, Leupold Vari-X Mil-dot telescope sight, Harris bipod, 20-round magazines and other necessary accessories. In 2005, a modified version of the SR-25 / Mk.11 rifle won US Army Semi-Automatic Sniper Rifle (XM110 SASR) competition, and today it is being issued to US Army snipers, in attempt to replace venerable M24 Sniper Weapon System. A certain controversy exists about this replacement, as some experts doubt that Knight's semi-automatic XM110 rifle could equal long-range accuracy of the bolt-action M24. However, Knights Armament Co claims that SR-25 is capable of 0.5 MOA accuracy with match ammo, and in the field Mk.11 or XM110 rifle can proved accurate and rapid fire out to 600 meters or even more, depending on particular circumstances and proficiency of operator. Use of quick-detachable silencer / sound moderator also has several benefits, the most obvious being concealment of the operator's position, as silencer decreases the sound of gunshot and completely eliminates muzzle flash. Another, less obvious benefit is that silencer also acts as an effective muzzle brake, decreasing recoil and thus permitting faster follow-up shots.



All rifles built on SR-25 platform share same basic action, which is based on AR-15 / M16 system. This is a gas-operated system with direct-impingement gas drive, which has no gas piston. Instead, powder gases are fed from the barrel and through a stainless-steel tube back into the receiver, and then into the cavity inside bolt carrier through the gas key. Inside the bolt carrier, powder gases push it back against the bolt, thus first causing the bolt to rotate and unlock from the barrel, and then to cycle the action. The rotary bolt has 7 radial lugs and improved extractor. Both upper and lower receiver halves are made from aircraft grade aluminum alloy, and connected by cross-pins. There is no "forward assist" button on the SR-25 rifles; the brass defelector is present. Barrels are of match class quality, and enclosed into free-floated forearm, fitted with Knights-made and designed Picatiny rails system.

This VFC SR25 GBBR is fully licensed by Knights Armament so you could expect it to have the full authentic markings and have the closest detail to the real on. Fully constructed in metal with a Knights Armament SR25 quad rail in the front, polymer stock and pistol grip like the real one, this is a gun you shall not miss. The VFC SR25 GBB is a gas blowback system that is an enlargered version of the VFC m4/ Umarex HK416 GBB system and has its own proprietary 20 round magazine. The receiver is made from forged and CNC milled Aluminium, and hard anodized to military spec. Both the free floating quad rail and charging handle are being CNC processed from Aluminium as well. Each of the SR25 would also have flip up iron sights and unique serial numbers.

The DX version differs from the normal version with a silencer that is matching serial number with the receiver, includes a gun case, bipod adaper, a bipod, a proprietary QD silencer and 3 rail covers.

This product is only compatible with gas designed specifically for Airsoft guns. Do not use lighter fluid or butane gas, as that will cause permanent damage.

SHIPS IMMEDIATELY MAP PROTECTED
The SR 25 rifle (Stoner Rifle, model 25) was developed by Reed Knight (owner of Knights Armament Co) and Eugene Stoner (designer of M16 and Stoner 63 rifles among other things) during early 1990s. In essence, the SR 25 was the AR-15 rifle scaled up to shoot 7,62x51 / .308 Win ammunition, with up to 60% of parts of new rifle being interchangeable with standard AR-15 components. This rifle sold well among civilian shooters who needed an accurate semi-automatic rifle in 7,62 / .308 caliber for hunting or target shooting. This rifle also found a favor among US Military - during early 1990s it was adopted by US Navy SEAL groups, as Mark 11 Model 0 sniper rifle system; use of Mk.11 Mod.0 rifle was later extended to US Marine Corps. Mark 11 Model 0 rifle system included the semi-automatic SR-25 rifle, a quick-detachable sound suppressor, also developed by Knights Armament Co, Leupold Vari-X Mil-dot telescope sight, Harris bipod, 20-round magazines and other necessary accessories. In 2005, a modified version of the SR-25 / Mk.11 rifle won US Army Semi-Automatic Sniper Rifle (XM110 SASR) competition, and today it is being issued to US Army snipers, in attempt to replace venerable M24 Sniper Weapon System. A certain controversy exists about this replacement, as some experts doubt that Knight's semi-automatic XM110 rifle could equal long-range accuracy of the bolt-action M24. However, Knights Armament Co claims that SR-25 is capable of 0.5 MOA accuracy with match ammo, and in the field Mk.11 or XM110 rifle can proved accurate and rapid fire out to 600 meters or even more, depending on particular circumstances and proficiency of operator. Use of quick-detachable silencer / sound moderator also has several benefits, the most obvious being concealment of the operator's position, as silencer decreases the sound of gunshot and completely eliminates muzzle flash. Another, less obvious benefit is that silencer also acts as an effective muzzle brake, decreasing recoil and thus permitting faster follow-up shots.



All rifles built on SR-25 platform share same basic action, which is based on AR-15 / M16 system. This is a gas-operated system with direct-impingement gas drive, which has no gas piston. Instead, powder gases are fed from the barrel and through a stainless-steel tube back into the receiver, and then into the cavity inside bolt carrier through the gas key. Inside the bolt carrier, powder gases push it back against the bolt, thus first causing the bolt to rotate and unlock from the barrel, and then to cycle the action. The rotary bolt has 7 radial lugs and improved extractor. Both upper and lower receiver halves are made from aircraft grade aluminum alloy, and connected by cross-pins. There is no "forward assist" button on the SR-25 rifles; the brass defelector is present. Barrels are of match class quality, and enclosed into free-floated forearm, fitted with Knights-made and designed Picatiny rails system.

This VFC SR25 GBBR is fully licensed by Knights Armament so you could expect it to have the full authentic markings and have the closest detail to the real on. Fully constructed in metal with a Knights Armament SR25 quad rail in the front, polymer stock and pistol grip like the real one, this is a gun you shall not miss. The VFC SR25 GBB is a gas blowback system that is an enlargered version of the VFC m4/ Umarex HK416 GBB system and has its own proprietary 20 round magazine. The receiver is made from forged and CNC milled Aluminium, and hard anodized to military spec. Both the free floating quad rail and charging handle are being CNC processed from Aluminium as well. Each of the SR25 would also have flip up iron sights and unique serial numbers.

The DX version differs from the normal version with a silencer that is matching serial number with the receiver, includes a gun case, bipod adaper, a bipod, a proprietary QD silencer and 3 rail covers.
Specifications
PlatformGAS
BrandVFC
ColorBlack
Originating ArmoryKNIGHTS ARMAMENT
Replica TypeSNIPER
ModelAR/M4 SERIES
Capacity (rds)20
Power (fps)440
Power SourceGreen Gas / Top Gas
Shooting ModeSemi Auto
BlowbackYes
Hop-upADJUSTABLE
Net Weight (kg)0.0
Length (mm)0.0
Write Your Own Review
You're reviewing:VFC SR25 KAC MK11 MOD0 GBB Airsoft Rifle DX Version (Licensed by Knight's Armament)
Your Rating
Customer Questions
No Questions
Please, mind that only logged in users can submit questions

Customer Who Bought This Also Bought