Thanks for the quick shipment!It is a trustworthy shop.
umenyan
Easy to damage if dropped
If you drop the magazine, this part will break easily.I also damaged my own magazine.I bought a lot of spares and exhibited them at a Japanese flea market, and they sold really well.There were a lot of people who were in trouble with the same damage Everyone was happy because I offered only the parts cost and shipping fee.
umenyan
Easily damaged.
The material is so soft that it will break if dropped on a carpet.
It is a must-have as a spare part.
umenyan
spare parts
If bumped or dropped, it will crack immediately.
I bought it as a spare part.
It is out of stock in Japan, so it was a great help.
umenyan
for the user
I ordered this while ordering my personal parts.
If you drop it, it will break immediately.
umenyan
spare parts
A spare is necessary because it is easily damaged.
Chuck S
Exact replacement
Hopefully stronger than the "SIG" part that comes on a new magazine . As noted in Umenyan's reviews this is a weak, brittle part -- at least the part on the OEM magazine. I don't intend to drop the magazine again if I can help it but bought spares for that eventuality.
Dirt simple replacement as this is a non-pressurized part. Drive out a pair of pins, retain the magazine follower, swap the broken for new feed lips, re-insert the pins. Takes less time than it does to read this review.
SIG does not sell any spare parts for their airsoft guns. When the feed lips broke their solution was to sell me a complete magazine -- about US$40 plus US$10 for shipping. Shipping from Hong Kong to Virginia was US$7.50.
5-Star rating is mainly RedWolf's order processing and customer service: First Class. I'll be back!
Jaymowr
Perfect!
I've just received this to replace a broken lip that fractured the second time in use. Take your time, use the right-sized punch (driven from left to right-take a close look at your now-exposed pin: drive the splined end out first), and then carefully tap the pins back in place in reverse order. It really did take only five minutes, and I've run 100 BBs through it: flawless function, and PERFECT! Note that this does appear to be an original part, and is made of plastic. Shipping was fast, and absolutely no problems with the transaction. Thanks very much, RedWolf!
jaymowr
Perfect!
I purchased some of these after breaking the lip accidentally by letting the follower and spring fly up, shearing the feed lip in half. The magazine I was using was the green gas mag. It does indeed look as if the lip is the same on both the gas and CO2 magazines, although I've not broken one of the CO2 mag lips. Installation was easy and quick: drive out the pins with an appropriately-sized punch (doesn't take much force at all), and drive the splined end of the pins out first (left to right, I believe, with the front of the mag facing away from you). Assemble in reverse order. I put 100 rounds through the now-fixed magazine, and it works like new! These do appear to be factory replacement parts.
The order was handled perfectly, shipped quickly, and was flawless! Thanks for making these available, and for letting me get in much needed practice. Redwolf has my business now!
KD
Super easy to replace and work great
I bought an Sig M18 mag off eBay and it arrived damaged with one of the feed lips snapped off (should have just ordered the mag here but that’s another issue). Thankfully Red Wolf had these in stock so I picked one up. Took a hole punch and popped out the two pins and swapped it out within 90 seconds. Super easy, fit great and good to know I can keep my GBB’s going strong since those mags are pretty expensive. I’m in the US and shipping was cheap and fast. 10/10