Guns Modify EVO Adjustable Nozzle Complete Set V1.0 for Guns Modify SCAR-L MK2 GBB

The EVO Adjustment Nozzle from Guns Modify is a significant upgrade for the Cybergun / Guns Modify SCAR-L Mk. 2 GBB Rifle. This nozzle is designed to conveniently adjust the power output of the MWS, catering to both field and user requirements, thereby eliminating the need for an NPAS rocket valve. By replacing the stock nozzle of SCAR-L Mk. 2 spec. nozzle, users can fine-tune the power output for both indoor and outdoor fields, ensuring a consistent performance that does not fluctuate, unlike traditional NPAS rocket valves.

In contrast to conventional nozzles, the GM adjustable nozzle features subtle design modifications, seamlessly integrating a power adjustment system located just above the nozzle head while maintaining compatibility with existing MWS spec. bolts. This system allows users to adjust the grub screw to achieve their desired power output, controlling the gas release with a screw lock that both indicates the current setting and secures the grub screw, ensuring consistent performance during extended use. For detailed operation instructions, please refer to the Operational Guide below.

This package is tailored for Cybergun / Guns Modify SCAR-L Mk. 2 GBB Rifle, requiring the end user to install the nozzle assembly set into their SCAR bolt. It includes both a high-flow and a standard-flow rocket valve, enabling further fine-tuning of the SCAR system's power output.

The GM Adjustment Nozzle is an excellent enhancement for Cybergun / Guns Modify SCAR-L Mk. 2 GBB rifle, allowing users to effortlessly adjust their system's power output on the fly, without the need to disassemble the nozzle assembly, as is necessary with some NPAS rocket valves. This upgrade significantly benefits players looking to optimise their SCAR system's power output for various field conditions.

Operational Guide (Important Read):

• Take out the bolt.
• Pull out the nozzle to expose the screw lock, you don?t have to disassemble the nozzle assembly.

1. Slightly pull back and hold onto the Screw Lock, allowing for the Adjustment Screw to rotate.
2. Using an M1.5 hex key, turn the adjust screw to Close (Increase Output) or Open (Decrease Output) the decompression hole.
3. Adjust the screw accordingly to the desired power output.
4. Release the screw lock, and rotate the screw a little bit to ensure the screw lock interfaces with the adjustment screw.

Check out more Internal Parts!

Compatibility:

• M1.5 Hex Key
• Cybergun / Guns Modify SCAR-L Mk. 2 GBB Rifle

Included:

• x1 Guns Modify EVO Adjustable Nozzle Complete Set V1.0 for Guns Modify SCAR-L Mk. 2 GBB
• x1 Guns Modify Standard Flow Rocket Valve
• x1 Guns Modify High Flow Rocket Valve