$354.99
Price

Wolverine Airsoft BOLT Sniper Rifle HPA Conversion Kit with Tokyo Marui VSR-10 Cylinder

BLT-CA-002
In Stock.
Out of Stock.
SKU
BLT-CA-002
HPA conversion kit for Bolt Action sniper rifles. Compatible with VSR 10 models and the Echo1 M28. Testing is in process for other sniper models as well.

Compatibility:
  • Tokyo Marui VSR 10* (CYLINDER IS REQUIRED)
  • Echo1 PSR 10* (CYLINDER IS REQUIRED)
  • JG Bar 10 (CYLINDER IS NOT REQUIRED, BUT RECOMMENDED)
  • Echo1 M28 (CYLINDER NOT COMPATIBLE, USE STOCK CYLINDER)
  • Cybergun FN Herstal SPR (CYLINDER IS NOT REQUIRED, BUT RECOMMENDED)

    WARNING: Many different brands and gun variants claim to be VSR compatible, but have small differences which can cause compatibility issues with our system. If you do not see your gun listed under the "Compatibility" section, please contact us or your local retailer for assistance before purchasing.

    *Stock cylinder used in this gun has different threads that are not compatible with the included cylinder head. We strongly suggest using our offered cylinder, however a compatible cylinder head is available from us upon special request.

    A few technical highlights from the BOLT:

  • * Electro pneumatic: This means there will be a small battery, but NO FCU. The trigger simply attaches to the outside of the trigger box and is actuated by the trigger. When actuated it powers the valve and fires the bb. This means the consistent output of a solenoid without the complexity and battery drain of an FCU.
  • * Exclusive 3-way valve design created by Wolverine Airsoft and manufactured by MAC powers the system.
  • * NO MOVING PARTS: During the firing of the bb nothing in the system moves other than the Solenoid Valve opening.
  • * Patent Pending Air Saver? Technology: Allows you to simultaneously save up to 50% of your air per shot and match the volume air output of the system to the barrel.
  • * Optional 1 Piece aluminum bolt simplifies the installation especially on guns where the cylinder head is pinned to the cylinder.
  • * Will have the option of using a special version of our WRAITH for self-contained co2 cartridge use with no external air line. ~150 shots per cartridge is possible
  • * Input pressure(subject to change): 80-180psi.

    You will also need the Wraith Co2 adapter and a High Pressure Regulator to make it work, you will also need to tap two holes on both the receiver and trigger pack to make this system work, if you do not have the skills for it, please contact your local technicians for installation.
  • SHIPS IMMEDIATELY MAP PROTECTED
    HPA conversion kit for Bolt Action sniper rifles. Compatible with VSR 10 models and the Echo1 M28. Testing is in process for other sniper models as well.

    Compatibility:
  • Tokyo Marui VSR 10* (CYLINDER IS REQUIRED)
  • Echo1 PSR 10* (CYLINDER IS REQUIRED)
  • JG Bar 10 (CYLINDER IS NOT REQUIRED, BUT RECOMMENDED)
  • Echo1 M28 (CYLINDER NOT COMPATIBLE, USE STOCK CYLINDER)
  • Cybergun FN Herstal SPR (CYLINDER IS NOT REQUIRED, BUT RECOMMENDED)

    WARNING: Many different brands and gun variants claim to be VSR compatible, but have small differences which can cause compatibility issues with our system. If you do not see your gun listed under the "Compatibility" section, please contact us or your local retailer for assistance before purchasing.

    *Stock cylinder used in this gun has different threads that are not compatible with the included cylinder head. We strongly suggest using our offered cylinder, however a compatible cylinder head is available from us upon special request.

    A few technical highlights from the BOLT:

  • * Electro pneumatic: This means there will be a small battery, but NO FCU. The trigger simply attaches to the outside of the trigger box and is actuated by the trigger. When actuated it powers the valve and fires the bb. This means the consistent output of a solenoid without the complexity and battery drain of an FCU.
  • * Exclusive 3-way valve design created by Wolverine Airsoft and manufactured by MAC powers the system.
  • * NO MOVING PARTS: During the firing of the bb nothing in the system moves other than the Solenoid Valve opening.
  • * Patent Pending Air Saver? Technology: Allows you to simultaneously save up to 50% of your air per shot and match the volume air output of the system to the barrel.
  • * Optional 1 Piece aluminum bolt simplifies the installation especially on guns where the cylinder head is pinned to the cylinder.
  • * Will have the option of using a special version of our WRAITH for self-contained co2 cartridge use with no external air line. ~150 shots per cartridge is possible
  • * Input pressure(subject to change): 80-180psi.

    You will also need the Wraith Co2 adapter and a High Pressure Regulator to make it work, you will also need to tap two holes on both the receiver and trigger pack to make this system work, if you do not have the skills for it, please contact your local technicians for installation.
  • Specifications
    ColorBlack
    BrandWolverine Airsoft
    PlatformHPA
    Replica TypeSNIPER
    Net Weight (kg)0.27
    Length (mm)0.0
    Write Your Own Review
    You're reviewing:Wolverine Airsoft BOLT Sniper Rifle HPA Conversion Kit with Tokyo Marui VSR-10 Cylinder
    Your Rating
    Customer Questions
    No Questions
    Please, mind that only logged in users can submit questions