Perun V2 Lightning Mosfet (ETU) for V2 AEG Gearbox (Front Wire)

The PERUN V2 Lightning MOSFET ETU offers the highest out-of-the-box trigger sensitivity of any Perun product to date. No modification to the trigger or gearbox is needed - the sensitivity can be adjusted at any time, even in the field, to suit your preference and play-style.

The PERUN V2 Lightning features:

Active brake - active brake stops the motor after each and every subsequent shot, preventing the spring from remaining compressed and eliminating overspin (double shot per trigger pull) in high-ROF Airsoft rifle builds. The brake strength is adjustable, and the brake can also be turned off entirely. Active brake and pre-cocking settings are independent of each other.

Pre-cocking - with pre-cocking enabled, the piston stays in the rear position after each shot with the spring primed and compressed, so that the follow-up shot fires the instant you pull the trigger, giving the user a split-second advantage when trigger response matters, especially for an AEG platform. The pre-cocking strength is adjustable and automatically adapts to the current battery voltage, so the piston always lands in the right spot, regardless of the battery's charge level. Active brake and precocking settings are independent of each other. To release the spring safely after using pre-cocking, switch to semi and fire one shot and hold the trigger - a second shot with maximum active brake will fire after three seconds, decompressing the spring and setting it back to neutral.

2-stage trigger - a light/half trigger pull fires in one mode while a deep/full trigger pull switches to another; similar to how a Steyr Aug trigger functions. Users can set unique combinations to suit their needs and playstyle, with available combinations like semi-burst, semi-auto, and burst-auto.

The Perun V2 Lightning comes with a proprietary selector plate that fits most AR/M4-style AEG Airsoft rifle replicas straight out of the box. For replicas with non-standard selector plates, the package includes a special magnet with double-sided tape and a positioning tool, making installation straightforward without the need for permanent modifications.

The selector can be easily calibrated after installation to ensure precise positional detection as the selector sensor utilizes magnetic Hall-effect sensors, making it completely unaffected by ambient light, so it works without any issues in replicas with cut-out or skeletonized receivers.

*Works without modification in most V2 gearboxes that are TM-spec. Compatible with brushed and brushless motors, all gearsets, including DSGs, and batteries from 7V to 17V. For a comprehensive compatibility list and exceptions, please refer to the manual included in the package.

Check out more Airsoft Parts

Compatibility:

• TM-Spec V2 Gearbox (AR/M4) Rear Wired

Includes:

• x1 Perun V2 Lightning Mosfet (ETU) for V2 AEG Gearbox (Front Wire)