$49.99
Price

G&P Tokyo Marui MWS GBBR Airsoft Roller Bolt with MWS 5 Position Buffer Tube Set

MWS026A
In Stock.
Out of Stock.
SKU
MWS026A
The G&P roller bolt with the MWS 5 position buffer tube set for the TM MWS M4A1 allows your MWS to directly adapt other sized stocks compatible with G&P (WA) measurements. The roller bolt also facilitates more efficient cycling with its roller.
SHIPS IMMEDIATELY
The G&P roller bolt with the MWS 5 position buffer tube set for the TM MWS M4A1 allows your MWS to directly adapt other sized stocks compatible with G&P (WA) measurements. The roller bolt also facilitates more efficient cycling with its roller.
Specifications
ColorBlack
BrandG&P
ModelAR/M4 SERIES
PlatformGAS
Replica TypeRIFLE
Net Weight (kg)0.2
Length (mm)160.0
MaterialMetal
Write Your Own Review
You're reviewing:G&P Tokyo Marui MWS GBBR Airsoft Roller Bolt with MWS 5 Position Buffer Tube Set
Your Rating

Matt

Not drop in, causing bolt to get stuck.

Not sure if installed incorrectly or provided a faulty part, but was disappointing to find out that I’m unable to use this part completely. 1: the roller bolt is only big enough to fit in the G&P Buffer tube, not the standard MTR16 Buffer. 2: When installing the aluminum buffer, would sometimes slip out of the buffer, due to it not sitting snug, like OEM counterparts 3: when using, at higher rates of fire, like Full auto or consistent single fire, the bolt will 100% lock PAST the bolt catch, in which needs to remove the magazine, hit the buffer tube a couple times then the bolt will return to fire position. - this is no matter the orientation of the spring, how far or how near the buffer is screwed into the lower receiver. Also weights added do not make a determinate factor aswell. Very sad that I’m unable to get this to work.

Customer Questions
No Questions
Please, mind that only logged in users can submit questions

Customer Who Bought This Also Bought