Systema expands their P.T.W. range with this TW5-A4, which marks a change from their range of M4/M16 P.T.W.s. Obviously, the Systema quality still remains and they have even improved the durability of the product even more.
This TW5-A4 features a one-piece die-cut metal body that has been produced to realize an unimaginable levels of strength and durability. Like the other guns in the Systema P.T.W. range, the TW5-A4 replicates the dimensions of the real steel equivalent; the main receiver has the same dimensions of the real one, thus parts used with the real steel, such as a scope mount, can be used with no hassles. Even with parts such as the grip frame, share the same dimensions as the real one. All this helps to make this a premier training tool of choice.
The control unit is adopted from the previous gearbox system, although has improved performance, able to endure a higher temperature generated thus making it even more reliable than before. The computer also allows the TW5 to operate in semi auto, 3-burst auto and full auto modes. Note that this is the first one on the airsoft market with 3-burst mode! The motor utilizes a steel magnet case and an exclusive TW5-specific 480 type motor. The PTW5-A4 MAX will come standard with the M150 Spring Cylinder Unit.
Like the previous M16 series, this TW5 maintains an interval dimension, between the outer and inner barrel of only ±0.05mm; the outer barrel is produced using Systema's method of metal shaving. The inner barrel incorporates an internal diameter of 6.04mm.
Systema recommend using a 9.6v 2400mAh battery, the stock is plenty of room to store a large battery and the maximum sized battery that can be used is a 12v 2400mAh battery. Battery not included.
Please read our review here
The MAX version shoots 460+fps and has had an array of improvements and modifications done to it, including:
Systema 9.6V2400mah for PTW MAX M16A2 / A3 (NI-CD)
Sanyo 9.6v 2400mah Battery (NiCd) - Large Type
(1) Sector gear
i Sector gear Hardening processing is added. Durability is improved.
ii sector gear B Nitriding processing is added. Durability is improved.
(2) Spur gear
Nitriding processing is added to each gear. Durability is improved.
Moderating ratio is changed. Torque is improved.
(3) Bevel gear
The hardness of hardening processing is changed. Durability is improved.
(4) Adopt one flange-less bearing
It changes with larger spur gear's diameter
(5) Cylinder unit
It changes to M150 specification.
Disclaimer: This product is not manufactured by H&K and is manufactured by SYSTEMA of Japan. This product is a toy only and is not a real firearm, and does not contain any trademarks from H&K, nor are there any markings of model number from H&K.
Please note that the battery is not included, we recommend using this two batteries: