 |
G&P MK18 Mod O |
|
 |
 |
 |
 |
In the real steel world, the Close Quarters Battle Receiver (CQBR) is a replacement upper receiver for the M4A1 Carbine. The CQBR replaces the M4 with a 10.3 inch barrel making it the modern equivalent of the Colt Commando short-barrel M16 variants of the past. The CQBR entered American armed forces service in 2000, the complete CQBR equipped carbine has been type-classified as the Mk 18 Mod 0.
The purpose of the Mk 18 Mod 0 is to provide operators with a weapon of submachine gun size, but firing a rifle cartridge, for scenarios such as VIP protection, urban warfare, and other close quarters battle (CQB) situations. In Airsoft terms, the shorter, more compact layout allows you to make use of the full advantages of the M4s choice of accessories, magazines and modifications in package to rival sub-machine guns in agility.
Using it as-is, its low-to-mid power makes it appropriate for indoor use. You can compliment the weapon further by using only low and mid cap magazines to avoid the slow-winding nature of hi-caps. You can customize the ergonomics to better suit your tastes; you can swap out the furniture for colored variants and add the same color rail covers to the front end to dual-tone your weapon. You might even look into stepping up the rate of fire significantly by switching to an 11.1v LiPo battery by having it re-wired installed into the stock tube.
The Mk 18 Mod 0 is a fantastic choice for someone looking to combine all the potential of an M4 family weapon with the mobility of an SBR (short barrel rifle).
Magazine Capacity: 130
Length: 695mm / 780mm
Built Material: Metal & ABS
Muzzle Velocity: 330-360fps
Gearbox: Version 2
Motor: G&P M120 Hi-Speed
Battery: Advise using 7.2v or 8.4v Battery (GP431). Not Included.
Includes:
MK18 Mod O Metal Body
M16 Magazine (130rds) (GP094)
CQB/R Rear Sight
RIS Grip (Black) (GP033)
RIS Rail Cover (Black) x 2 (GP032B)
CQB/R Sling Adapter with Bungee Sling (Black) (GP476B)
T-Shape Connector Wire Set For Recharge
Manual
|
|
|
 |
|
 |
|
 |
Upgrade |
|
 |
| |
 |
Related Products |
|
 |
 |
 |
 |
 |
 |
 |
 |
Tokyo Marui 300rd Magazine for M16 / M4
A high capacity replacement of the standard magazine for the Marui M16 series rifle. Fits M4, M4 RIS, SR16, M16A1, M16A2, M16VN, M733 and CAR15. Large thumb dial on bottom of magazine allows you to wind it up and feed 300 rounds of BBs into your AEG. Full metal construction.
|
|
|
 |
 |
Tokyo Marui 68rd Magazine for M16 / M4
We carry an unlimited quantity of standard M16 series magazines in stock. These will fit all Marui ICS and Classic Army AEGs within the entire M16 series - including but not limited to M4, M4 RIS M16A1, M16A2, SR16, M16VN, CAR 15, M733. Full metal construction.
|
 |
|
|
|
 |
|
 |
|
|
 |
|
 |
|
 |
People who bought this item also purchased |
|
 |
 |
 |
 |
 |
 |
Tokyo Marui 0.2g 6mm BBs (3500 rds)
Suitable for shooting any airsoft gun, standard or upgraded.
|
|
 |
 |
Excel 0.2g 6mm BBs 3700 rounds
High quality BBs from Excel of Japan. Super smooth and super round for reliable use in AEGs and GBBs.
|
|
 |
 |
Tokyo Marui HI-CAPA 5.1
The Hi-Capa 5.1 is very valuable, this pistol offers lots of bang for the buck. Makes efficient use of HFC134a to pack a wallop not found on other more expensive pistols. Metal parts include : recoil spring guide rod, nickel plated hammer, adjustable rear sight, front sight, magazine catch, magazine, and frame with an ABS grip. The barrel is also handsomely nickel plated. Good for 290fps when using HFC22 TOP Gas! Very smooth and strong kicking gun!
|
|
 |
 |
Pantac Rifle Carry Bag (Black) - 914mm
Phantom releases their high quality rifle bag series, there are 2 handle straps and 1 long paded carry strap. Comes with 2 velcro strap to makes sure the AEG in place. 15mm
thick cotton inside for protecting the rifle and magazines. Four M4 magazine pouches inside with velcro cover inside the bag.
|
|
 |
 |
King Arms XL size BB loader (470 rds, Black)
Rapid 6mm BB loader. Can store up to 470 round BBs. Packaged with outlet adaptor. Suitable for most BB magazine.
|
 |
|
|
|
 |
|
 |
|
|
 |
PRODUCT DETAILS |
|
 |
 |
 |
 |
|
 |
| Availability |
: |
Now
|
| Price |
: |
USD$316.0
|
| |
|
|
|
|
 |
Product Brand
|
G&P |
Product Code
|
GP615 |
Hop-Up
|
ADJUSTABLE |
| Weight |
3,500 g |
| Length |
695 mm |
| Capacity |
130 rds |
| Power |
360 fps |
Motor
|
|
| Battery Size |
8.4v G&P stock |
| Shooting Mode |
semi, full |
|
 |
|
|
 |
|
 |
|
| |
CLEARANCE SALE! |
|
 |
 |
 |
 |
 |
King Arms Galil MAR (Clearance)
|
|
|
|
|
 |
|
 |
|
LATEST REVIEWS |
|
 |
| |
|