Need Help?
$45.00
PTS Mega Arms AR15 Slide Lock Charging Handle for VFC GBBR / Systema PTW
MG010490307
In Stock.
Out of Stock.
SKU
MG010490307
PTS Mega Arms AR15 Slide Lock Charging Handle, always stepping it up a notch everything single time. It's meant for the VFC M4 GBBR / Systema PTW M4 out there and is completely made out of metal.
This is how you would replace the original charging handle:
1) Full and release charging handle as if charging the airsoft weapon and set it to single fire mode.
2) Release rear locking pin to separate upper and lower receiver. Only 1 pin needs to be released, hinge open upper and lower receiver.
3) Pull out airsoft bolt with charging handle (Note charging handle position with airsoft bolt during removal)
4)Place the Mega Arms AR15 Slide Lock Charging Handle in the same position above and the airsoft bolt and insert the combined parts into the upper receiver.
5) Close upper and lower receiver and replace the locking pin in locked position.
This is how you would replace the original charging handle:
1) Full and release charging handle as if charging the airsoft weapon and set it to single fire mode.
2) Release rear locking pin to separate upper and lower receiver. Only 1 pin needs to be released, hinge open upper and lower receiver.
3) Pull out airsoft bolt with charging handle (Note charging handle position with airsoft bolt during removal)
4)Place the Mega Arms AR15 Slide Lock Charging Handle in the same position above and the airsoft bolt and insert the combined parts into the upper receiver.
5) Close upper and lower receiver and replace the locking pin in locked position.
SHIPS IMMEDIATELY MAP PROTECTED
PTS Mega Arms AR15 Slide Lock Charging Handle, always stepping it up a notch everything single time. It's meant for the VFC M4 GBBR / Systema PTW M4 out there and is completely made out of metal.
This is how you would replace the original charging handle:
1) Full and release charging handle as if charging the airsoft weapon and set it to single fire mode.
2) Release rear locking pin to separate upper and lower receiver. Only 1 pin needs to be released, hinge open upper and lower receiver.
3) Pull out airsoft bolt with charging handle (Note charging handle position with airsoft bolt during removal)
4)Place the Mega Arms AR15 Slide Lock Charging Handle in the same position above and the airsoft bolt and insert the combined parts into the upper receiver.
5) Close upper and lower receiver and replace the locking pin in locked position.
This is how you would replace the original charging handle:
1) Full and release charging handle as if charging the airsoft weapon and set it to single fire mode.
2) Release rear locking pin to separate upper and lower receiver. Only 1 pin needs to be released, hinge open upper and lower receiver.
3) Pull out airsoft bolt with charging handle (Note charging handle position with airsoft bolt during removal)
4)Place the Mega Arms AR15 Slide Lock Charging Handle in the same position above and the airsoft bolt and insert the combined parts into the upper receiver.
5) Close upper and lower receiver and replace the locking pin in locked position.
| Color | Black |
|---|---|
| Brand | PTS |
| Originating Armory | MEGA ARMS |
| Model | AR/M4 SERIES |
| Platform | GAS |
| Replica Type | RIFLE |
| Net Weight (kg) | 0.04 |
| Length (mm) | 178.0 |
Write Your Own Review
Customer Questions
-
VFC VR635 DX GBBR - Black$304.99
Customer Who Bought This Also Bought
-
RWA Fortis SWITCH Rail - 14 inch KeyMod for M4 AEG & GBB SeriesSpecial Price $47.99 Regular Price $119.99
