 |
TMC V2 Strike Metal Mesh 3D Cutting Mask (AT) |
|
|
 |
|
|
Velcro blackstraps attached mask, this protector has a comfortable and secure fabric cover along the rim of the steel mesh portion. The mesh itself is plastic coated so as to resist weather and rusting. These masks are available in different colored and camo versions.
This Version 2 model goes a step further with two sets of straps at it does not just cover the mouth and nose but extends up past the law to cover the ears as well. The flexible nature of the mesh weave means that the mask is tightened such that it bends to conform and wrap around the curve of your head. The space and flex is probably sufficient to accommodate over the top of additional ear coverings like communications gear although that will depend on your comms equipment of course.
Furthermore, another upgrade over the version one is the addition of a fabric wrapped padded layer which allows for a tighter more comfortable fit around the jaw and chin.
Mesh masks allow breathing and talking through it unobstructed and as such are not as uncomfortable as solid masks nor do they have as much issues with fogging the eye protection or muffling your voice as much. That said, as a mesh mask it will stop broad objects but offer nothing for fine particulates so sand, dust, smoke and the like with drift through and high power BB strikes can result in BB fragments passing through the mesh (albeit it at a reduced velocity) but it has been tested up to and including repeated strikes at short range with 2 joule / 465fps weapons with no problem (again, no promises about fine particulates though).
The revised 3D cutting enhancement makes two small modifications at mildly greater cost, it adds additional stitching to the slightly different fabric cut to add a little surface texture to show its shape better. It also has a small (35 x 25mm) Velcro patch added on the lower jaw left side to allow the addition of small identification markers of your own choosing (not included).
Mesh masks offer one of the cheapest lower face protection options in Airsoft and offer advantages with breathing and communication but are otherwise not very suited for longer range use or when protection from environmental debris is a factor. When playing at shorter range and indoors with lower powered weapons however, the mesh mask can offer a very suitable option without hurting the wallet. Its also a nice choice for those of us who avoid lower face protection entirely due to fogging issues and so having one of these as the alternative to nothing at all can be all the more of a worthy option.
|
|
|
|
|
|
|
|
|
| Related Products |
|
|
|
|
|
|
|
 |
|
Guarder C2 Polycarbonate Eye Protection Glasses (Yellow)
Highly durable and flexible protective glasses kit made for shooting in various ambient conditions. Full package comes complete with soft padded belt mounted carrying case, 4 different tinted lenses that are interchangeable into the durable plastic adjustable frame.
|
|
|
 |
|
HFC Reticular Full Face Mask with Neck Protection (Oilve Green)
Durable and hight quality ABS construction offers strong protection. High quality lens offers point-blank protection for your eyes . Adjustable head-strap makes the mask fits your size and very comfortable to wear. Lots of space between mask and mouth for easy breathing. Foam face padding inside the mask keeps it in place firmly when sweaty. Come with detachable and flexible plastic neck cover. Offers full face protection. A great value.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
People who bought this item also purchased |
|
|
|
|
|
 |
|
Tokyo Marui M14 (Brown Version)
Long awaited Tokyo Marui M14 will be released in July 2005! Full size as the real steel rifle, the M14 comes with a one piece outer barrel with 14mm screwed flash hider, solid constructed body, and a stock that holds a large 8.4v battery. This rifle uses Marui's new Version 7 design gearbox to generate approximately 280fps of power. Shoots in semi and full auto mode. Comes with 70 rounds standard magazine. Adjustable hop-up revealed by pulling back on charging handle. Windage and range adjustable rear sight. Very hefty and solid with abundant metal parts at almost 4kg! Imitation wood stock is durable and refined to look sufficiently real. MSRP is USD 430.
|
|
 |
|
Tokyo Marui DT.45
Detonics are an American-based company noted for their compact 1911 design pistols. Tokyo Marui's latest blowback pistol gives a nod of appreciation to their work, with this nice replica of the Detonics .45 compact pistol.
|
|
 |
|
VFC SR16 Defender (E Series)
VFC releases an "Economic" line of AEGs calling it the E series, this specific model however, is the SR16 Defender.
|
|
 |
|
Wiley X Black Combat Assault Glove - Medium (Export Only)
The new, 2nd generation CAG-1 gloves provide superior hand protection without compromising control and finger dexterity. The unique blend of 80% Nomex, 20% Kevlar weave offers excellent FR (flame resistance). Our patent pending injection-molded knuckle protector and FR treated goat leather combination make this one of the most durable combat / tactical gloves ever produced.
|
|
 |
|
Pantac MTV Body Armor (Medium / CB CORDURA) FREE SHIPPING
This MTV Armor is the latest product from Pantac, it provides good protection levels to the Interceptor system.
|
|
|
|
|
|
|
|
|
|
|
| PRODUCT DETAILS |
|
|
|
|
|
|
|
| Availability |
: |
Now
|
| Price |
: |
USD$21.0
|
| |
|
|
|
|
|
Product Brand
|
TMC |
Product Code
|
TMC0959 |
| Weight |
222 g |
|
|
|
|
|
|
|
|
|
|
| |
| CLEARANCE SALE! |
|
|
|
|
 |
|
PM Concept AFV P2000 Dual Retention Duty Holster for M9/ M92F (Clearance)
|
|
|
 |
|
Airsoft Surgeon Warrior Bag (Clearance)
|
|
|
 |
|
Pantac Range Bag (OD / CORDURA) (Clearance)
|
|
|
|
|
|
|
|
|
 LATEST REVIEWS |
|
|
| |
|
