 |
Pantac Molle Expedition Backpack (ACU / Cordura) |
|
|
 |
|
|
A very large CORDURA backpack, it lives up to its name as an expedition model with its sheer ruggedness and massive carry volume all wrapped up in some serious straps and buckles (adjustable) to ensure your pack stays bundled nice and tight.
This pack does not mess around, the main compartment runs virtually the whole length and width of the bag; access to the main compartment is available via the top flap as well as a side zip. The main compartment is approximately 25 x 35 x 62cm making it more then capable of taking both large guns as well as utility loads. There is also a waterproof flap with draw string for sealing the main compartment to a weatherproof degree ensuring even the heaviest rain will stay of your carry load or visa versa your wet clothing will not leak moisture.
The flap also can act as an extender expanding the length of the main compartment from 62cm out to about 92cm. Putting this in to context, an AK-47 is about 97cm long, an M16A2 around 100cm; this pack is large enough to take all but the most extreme length weapons and can easily accommodate the girth of multiple weapons or even a single monstrous piece like an M249 or even an M60E4.
In terms of practical use and comfort, the pack features both shoulder straps and waist straps and both, as well as a back pad, are all heavily padded to help spread the contact when carrying a heavy payload.
In terms of secondary compartments, again this setup does not bother with fiddly little pockets. The top flap encloses as small pocket in itself to form an easy access top pouch for quick reach item when in transport. The front of the pack incorporates a secondary pouch with a side access zip, this pouch is approximately 45 x 35cm allowing to store a whole myriad of secondary equipment including large scopes, pistols or possibly even submachine guns.
And of course, what Pantac apparel would be complete without a generous soaking in a pool of MOLLE rigging. Caked in the stuff, this pack has MOLLE on all sides (yes ALL sides) so you can add additional pouches, utilities and even secondary packs to your wildest logistical desires.
Furthermore, typically thorough of Pantac, this model is available in a variety of major color schemes so be sure to check them all out to see what fits with your needs. This pack is so robust and practical, it even stands above and beyond Airsoft as it could easily serve as a general purpose hiking, camping of backpacking base rig with its ability to both function as a great pack as well as incorporate a theoretically unlimited amount of MOLLE attach additions.
|
|
|
|
|
|
|
|
|
| Related Products |
|
|
|
|
|
|
|
 |
|
Pantac MOLLE Short Radio Pouch (RG / CORDURA)
This Pantac pouch is an ideal accessory for using with a MOLLE-webbed product, such as a tactical vest or a backpack. Designed for holding a telecommunications device. Approximately 150mm x 90mm in size.
This pouch benefits from being made out of INVISTA 1000D Cordura Nylon, with incredibly durable properties, making it more resistant to the usual wear and tear (up to three times more resistant than normal Nylon).
The construction is made to military specifications, which ensures that this product will last a long time, throughout all conditions. The material is resistant to water, and can handle damp environments easily, maintaining its structure.
|
|
|
 |
|
Pantac Spec Ops Series MOLLE Horizontal Pouch (Khaki, CORDURA)
Constructed with CORDURA, can be attached to the MOLLE system. With mesh pocket inside for holding things easily, size is 25cm x 9cm x 7cm (W x H x D).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
People who bought this item also purchased |
|
|
|
|
|
 |
|
Tokyo Marui M14 (Brown Version)
Long awaited Tokyo Marui M14 will be released in July 2005! Full size as the real steel rifle, the M14 comes with a one piece outer barrel with 14mm screwed flash hider, solid constructed body, and a stock that holds a large 8.4v battery. This rifle uses Marui's new Version 7 design gearbox to generate approximately 280fps of power. Shoots in semi and full auto mode. Comes with 70 rounds standard magazine. Adjustable hop-up revealed by pulling back on charging handle. Windage and range adjustable rear sight. Very hefty and solid with abundant metal parts at almost 4kg! Imitation wood stock is durable and refined to look sufficiently real. MSRP is USD 430.
|
|
 |
|
Tokyo Marui DT.45
Detonics are an American-based company noted for their compact 1911 design pistols. Tokyo Marui's latest blowback pistol gives a nod of appreciation to their work, with this nice replica of the Detonics .45 compact pistol.
|
|
 |
|
VFC SR16 Defender (E Series)
VFC releases an "Economic" line of AEGs calling it the E series, this specific model however, is the SR16 Defender.
|
|
 |
|
Wiley X Black Combat Assault Glove - Medium (Export Only)
The new, 2nd generation CAG-1 gloves provide superior hand protection without compromising control and finger dexterity. The unique blend of 80% Nomex, 20% Kevlar weave offers excellent FR (flame resistance). Our patent pending injection-molded knuckle protector and FR treated goat leather combination make this one of the most durable combat / tactical gloves ever produced.
|
|
 |
|
Pantac MTV Body Armor (Medium / CB CORDURA) FREE SHIPPING
This MTV Armor is the latest product from Pantac, it provides good protection levels to the Interceptor system.
|
|
|
|
|
|
|
|
|
|
|
| PRODUCT DETAILS |
|
|
|
|
|
|
|
| Availability |
: |
Now
|
| Price |
: |
USD$308.0
|
| |
|
|
|
|
|
Product Brand
|
PANTAC |
Product Code
|
PK-C769-AC-A |
| Weight |
3,200 g |
|
|
|
|
|
|
|
|
|
|
| |
| CLEARANCE SALE! |
|
|
|
|
 |
|
PM Concept AFV P2000 Dual Retention Duty Holster for M9/ M92F (Clearance)
|
|
|
 |
|
Airsoft Surgeon Warrior Bag (Clearance)
|
|
|
 |
|
Pantac Range Bag (OD / CORDURA) (Clearance)
|
|
|
|
|
|
|
|
|
 LATEST REVIEWS |
|
|
| |
|
