Currency
You are here: REDWOLF > Home

PRODUCT DETAILS BOL Battery Charger DD01 (1.2V - 13.8V, 110v-240v Power Supply included) for NiMH / NiCD Batteries (UK Plug)

BOL Battery Charger DD01 (1.2V - 13.8V, 110v-240v Power Supply included) for NiMH / NiCD Batteries (UK Plug)

Product Brand: BOL
Product Code: CHG-DD01-UK
Length: 0 mm
Availability:
Now
Unit Price: USD$71.80

Add to Cart

Description

BOL Battery Charger DD01 (1.2V - 13.8V, 110v-240v Power Supply included) for NiMH / NiCD Batteries (UK Plug).

Features:

  • High Speed same rate negative delta voltage and zero delta voltage auto-detect cut off circuit with MOSFET control for peak detection. Pulsation charge method to prevent overcharge and overheat.
  • Charge Ni-HM battery by Zero delta voltage technology without using thermo-detection probe.
  • User selectable charging mode for Ni-CD and Ni-HM battery.
  • Front panel with "MODE" button and "dial log" to switch between: SLOW CHARGE, FAST CHARGE, DISCHARGE, 1 CYCLE and 3 CYCLES (Dial Log)
  • "CHARGE AMP" to select charging current from 0.5A ~ 6.0A.
  • 3 LED indicators for SLOW CHARGE, FAST CHARGE, and DISCHARGE.
  • 4-digit LCD display with back-light showing output V, output A, capacity mAH, peak voltage and duration information.
  • 8-bit 8MHz CPU with 2KB ROM, 128B RAM, 8-chanel 10-bit AD and 8-bit PWM current control.
  • Volt threshold 4mV/cell for Ni-CD and NiMH battery.
  • Auto-detect the number of cells and battery.
  • Trickle current (0.1A) after any mode finished.
  • Reverse polarity protection system.
  • Charge battery pack with combination 1~15 cells.
  • Auto detect switching power supply input 100~240V AC or 12V DC.
  • Build-in 5A discharge device for single or 3 cycles discharge.
  • 6 cm cooling fan to enhance the performance.

    Specification:

  • Input Voltage: DC 12.0V ~ 15.0V.
  • Number of Cells: 1 ~ 15 cells.
  • Battery Voltage Range: 1.2V to 18.0V with come with AC adapter.
  • Charging Current: 0.5A to 6.0A.
  • Discharge Current: 5A